• KIRKLARELİ ÜNİVERSİTESİ KAYALI KAMPÜSÜNÜN DÖNEMSEL RÜZGAR ENERJİSİ POTANSİYELİNİN BULUNMASI 

  Çakmakçı, Bekir Adem; Hüner, Engin (Kırklareli Üniversitesi, 2019)

  Buçalışmada, Kırklareli Üniversitesi Kayalı Kampüsü’nün dönemsel rüzgar enerjisipotansiyeli, 2018 yılı sonbahar dönemi (Eylül, Ekim ve Kasım ayları) için 5dakika aralıklarla ölçülen rüzgar hızı verilerine dayanarak ...

• YABANCI UYARTIMLI EKSENEL AKILI SENKRON ALTERNATÖRÜN ELEKTROMANYETİK TASARIMI VE ANALİZİ 

  Hüner, Engin (Kırklareli Üniversitesi, 2020)

  Yapılan bu çalışmada yabancı uyartımlı eksenel akılı (YUEA) senkron alternatörün elektromanyetik analizi ve tasarımı ANSYS Maxwell 3d programı ile gerçekleştirilmiştir. Son yıllarda eksenel akılı sürekli mıknatıslı alternatör ...

• CURRENT SITUATION OF WIND ENERGY IN TURKEY AND ASSESMENT OF YALOVA’S WIND ENERGY POTENTIAL 

  Gökçöl, Cihan; Uğurlu, Adem (Kırklareli Üniversitesi, 2016)

  Accordingto the wind energy statistics, Turkey has indicated a significant developmentabout wind energy utilization in the last decade. But, it is the fact thatTurkey has utilized only 4% of its total technical wind energy ...

• A review study on LPG as an alternative refrigerant 

  Uğurlu, Adem; Gökçöl, Cihan (Kırklareli Üniversitesi, 2017)

  This study reviews the literature, which has numerous works on the useof LPG, a hydrocarbon fuel utilized in many types of equipment, as analternative refrigerant without any change in refrigerators, air conditioners,and ...

• Construction of homo- and heterometallic-pyridine-2,3-dicarboxylate metallosupramolecular networks with structural diversity: 1D T5(2) water tape and unexpected coordination mode of pyridine-2,3-dicarboxylate 

  Semerci, Fatih; Yeşilel, Okan Zafer; Keskin, Seda; Darcan, Cihan; Taş, Murat; Dal, Hakan (Royal Soc Chemistry, 2013)

  Five new homo and heterometallic Cu(II), Cd(II), Cu(II)-Ag(I), Cu(II)-Cd(II) supramolecular networks with pyridine-2,3-dicarboxylate (pydc), {[Cu(mu-pydc)(dmpen)(2)]}(n) (1), [Cu-2(mu-pydc)(2)(emim)(4)]center dot 2H(2)O ...

• Structural investigation of AlInN/AlN/GaN heterostructures 

  Tamer, M.; Öztürk, M. K.; Çörekçi, S.; Baş, Y.; Gültekin, A.; Kurtuluş, G.; Özbay, E. (Springer, 2016)

  AlInN/AlN/GaN high-electron-mobility transistor (HEMT) structures were grown on undoped-GaN-layers/sapphire templates by metal-organic chemical vapor deposition to investigate the properties of HEMTs with various thickness ...

• Preparation of RF sputtered AZO/Au thin film hydrogen peroxide sensitive electrode for utilization as a biosensor 

  Durukan, İlknur Kars; Çalışkan, S.; Çete, S.; Çevrimli, B. S.; Kınacı, B.; Özen, Y.; Özçelik, S. (Springer, 2014)

  In this study, hydrogen peroxide (H2O2) sensitive Al doped ZO(AZO)/Au thin film electrode has been developed for the utilization as a biosensor. A preferred c-axis oriented AZO/Au thin film was deposited on quartz substrate ...

• Two-Dimensional Metal-Organic Framework Nanostructures Based on 4,4 '-Sulfonyldibenzoate for Photocatalytic Degradation of Organic Dyes 

  Çiftlik, Asena; Semerci, Tuğçe Günay; Şahin, Onur; Semerci, Fatih (Amer Chemical Soc, 2021)

  Four new two-dimensional metal-organic frameworks, namely, [Zn-2(sdba)(2)(pbisopix)](n) (KLU-8) (KLU is referring to Kirklareli University), {[Cd-2(sdba)(2)(pbisopix)]center dot 2H(2)O}(n) (KLU-9), [Cd(sdba)(pbisopix)](n) ...

• Comparative Controlling of the Lorenz Chaotic System Using the SMC and APP Methods 

  Köse, Ercan; Mühürcü, Aydın (Hindawi Ltd, 2018)

  The Lorenz chaotic system is based on a nonlinear behavior and this causes the system to be unstable. Therefore, two different controller models were developed and named as the adaptive pole placement and sliding mode ...

• A NEW HYBRID METHOD FOR REDUCING COGGING TORQUE IN THE AFPM WIND GENERATOR 

  Hüner, Engin; Mutlu, Aykan (Taylor & Francis Inc, 2021)

  Reducing the cogging torque in the axial flux permanent magnet (AFPM) generators is an important study area. Especially, AFPM generators with open slotted and rectangular-shaped poles have high cogging torque and high total ...

• Evaluation of wind energy potential: a case study 

  Çakmakci, Bekir Adem; Hüner, Engin (Taylor & Francis Inc, 2020)

  In this study, the wind energy potential of the Kirklareli University Kayali Campus at a height of 100 meters has been evaluated by using statistical distribution methods. The parameters of the distributions were calculated ...

• Thermoforming behavior of 3D-printed PLA sheets 

  Ekşi, Olcay; Karabeyoğlu, Sencer Süreyya; Çınar, Kenan; Mühürcü, Aydın (Carl Hanser Verlag, 2020)

  Fused deposition modeling is one of the most well-known additive manufacturing methods. It might be considered the easiest way to produce particle reinforced composites or unreinforced sheets which are biodegradable and ...

• Design and manufacture of automated controlled test machine detecting braking characteristic of brake lining in vehicles 

  Timur, Mustafa; Kuşçu, Hilmi; Toylan, Hayrettin (Sage Publications Ltd, 2017)

  This study has been carried out in order to measure friction coefficient of friction materials used in autos through computer program. Variants such as speed, temperature, and pressure have been discussed and the effect ...

• Biogas energy opportunity of Ardahan city of Turkey 

  Özer, Betül (Pergamon-Elsevier Science Ltd, 2017)

  The importance of renewable energy usage is increasing gradually due to the reasons of energy supplying security, environmental pollution and reducing dependency on external sources in all over the world as also same in ...

• A two-dimensional photoluminescent cadmium(II) coordination polymer containing a new coordination mode of pyridine-2,3-dicarboxylate: Synthesis, structure and molecular simulations for gas storage and separation applications 

  Semerci, Fatih; Yeşilel, Okan Zafer; Soylu, Mustafa Serkan; Keskin, Seda; Büyükgüngör, Orhan (Pergamon-Elsevier Science Ltd, 2013)

  A novel two-dimensional (2D) coordination polymer, [Cd(mu-pydc)(2-meim)](n) (1) (pydc = pyridine-2,3-dicarboxylate, 2-meim = 2-methylimidazole) was synthesized and characterized by spectral methods (FT-IR and photoluminescence), ...

• From Metalloligand to Extended 3D Network: Synthesis, Crystal Structure and Magnetic Property of {[Cu(en)(2)][Cu(mu(3)-pydc)(2)]center dot 6H(2)O} (n) 

  Semerci, Fatih; Yeşilel, Okan Zafer; Şahin, Ertan; Yerli, Yusuf; Topkaya, Ramazan (Springer, 2011)

  A novel 2D coordination polymer, {[Cu(en)(2)][Cu(mu(3)-pydc)(2)]center dot 6H(2)O} (n) (1) pyridine-2,3-dicarboxylic acid (pydcH(2)); ethylenediamine (en), based on the metalloligand [Cu(mu-pydcH)(2)] (n) , has been prepared ...

• Comparative life cycle analysis of municipal waste management systems: Kirklareli/Turkey case study 

  Özer, Betül; Yay, Aliye Suna Erses (Springer Heidelberg, 2021)

  Waste-to-energy approaches are becoming increasingly important around the world, and municipal solid waste (MSW) as a renewable and sustainable energy source is of great importance to be considered in preventing climate ...

• Oxalamide-Functionalized Metal Organic Frameworks for CO2 Adsorption 

  Güçlü, Yunus; Erer, Hakan; Demiral, Hakan; Altıntaş, Çiğdem; Keskin, Seda; Tumanov, Nikolay; Semerci, Fatih (Amer Chemical Soc, 2021)

  Metal-organic frameworks (MOFs) have received great attention in recent years as potential adsorbents for CO2 capture due to their unique properties. However, the high cost and their tedious synthesis procedures impede ...

• Three-dimensional finite element modeling of effect on the cutting forces of rake angle and approach angle in milling 

  Gök, Kadir; Sarı, Hüseyin; Gök, Arif; Neseli, Süleyman; Türkeş, Erol; Yaldız, Süleyman (Sage Publications Ltd, 2017)

  In this study, milling operations were carried out using AISI 1040 specimens steel in dry cutting conditions. The cutting tools used in the experiment include P20 tool steel and they also have three different approach ...

• A comparative analysis study of alternative energy sources for automobiles 

  Uğurlu, Adem; Öztuna, Semiha (Pergamon-Elsevier Science Ltd, 2015)

  Depletion of oil resources and some environmental factors have been pushing automobile makers and the scientific communities to study on the use of alternative energy sources in automobiles. In this respect, some energy ...

View more